In the initial years of the Miladi calendar, the Romans managed to bring water to the city with water pipes. They made fountains to ensure that these waters were discharged regularly. The fountains were inspected by the movement of a circular piece placed inside the pipe.

When the circular part stopped to break into the pipe, the water flow from the pipe was blocked. This system was used throughout the Middle Ages. By the 19th century, most of the houses had been plumbed, and the water flow rate was also increased. For this reason more sophisticated faucet types were needed.

In England, Thomas Gryll found a screwed faucet system in 1800.

Faucet is a valve that controls the flow of any liquid or gas fluid in this system, the amount of water flowing in each movement of the screw decreases, and at the most compressed point the water is completely cut off.

Chromium-plated brass (yellow) material is particularly preferred because it does not rust in its production. It can be found at the time of arrival

At home, it is usually found in wet areas such as bathrooms, toilets, kitchens, and is known by names such as bathroom battery, rechargeable battery, basin battery, etc. >

Faucet is used for species with only one faucet per person, but this is a misuse.

There are also types such as garden faucets. In addition, there are intermediate taps called “condiment faucets”. It is often used with the wrong word among the public because the toilet is used. The word “taharat” also means Arabic “tahir” or “clean”.

A variety of faucets with multiple faucets are called batteries or faucets.

The Anatolian Seljuks In waterworks facilities such as fountains, baths, fountains they built in Anatolia, especially in fountains, water was sometimes poured from a chimney carved from a stone gutter or wood and sometimes from a mineral pipe before being poured directly into the lagoon. These mine pipes, which are considered to be the forerunners of the mudrock and which are installed in places of water in the fountains, are called “lüle”. The lüle, which is also used in Ottoman fountain architecture and is a “water measuring unit” at the same time, was also used in the Seljuk period. The fountain that is as much as the day-to-day fountain from the Anatolian Seljuks is not enough to be tried, and the number of original ones from these fountains is rare.

New techniques have been developed since 1950, when electricity started to enter workshops. In these years, the tap water used glass water for sealing, and the faults from the casting were filled with solder. In order to clean the product, the leveling and polishing processes have been applied to the taps and the chrome coating has started. With the start of the faucet production industry, quality and quantity of production that do not require imported products have been realized. At the beginning of the 1980s, there was a mix of hot and cold water mixes with two hands, as well as a mix of hot and cold water and hot and cold water mixing and sealing, with a spherical and ceramic disk seal group. Share Info.

Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn